Home /Search
Search datasets
We have found 784 datasets for the keyword " photogrammetry". You can continue exploring the search results in the list below.
Datasets: 103,438
Contributors: 42
Results
784 Datasets, Page 1 of 79
Historical aerial photography of Indian Residential Schools
To support a wide range of efforts to understand the geographic context and historical conditions of the Indian residential schools sites for a wide range of stakeholders, Indigenous Services Canada has created a Web service to access and visualize historical aerial photography for those sites. The Historical aerial photography of Indian residential schools dataset contains digital scans of aerial photographs that were acquired from 1924 to 1998 over Indian Residential school sites and surrounding areas across Canada, as well as basic information about each photography and depicted site. The digital images were georeferenced, to match ground coordinates, saved in a resampled uncompressed raster format and compiled in a single mosaic layer. The dataset does not include the complete range of aerial photographs of each site. Instead, an attempt has been made to select a single optimal photograph for each site based on good photographic quality and the site's years of operation. In some cases no photograph is available, and in others a photograph was only available after the years of operation. The source scanned prints was obtained from the archives of the National Air Photo Library (NAPL) of Natural Resources Canada (NRCAN). This dataset should be considered evergreen as new information and photography sources are identified.It should be noted that this dataset can only be downloaded using ArcGIS and ArcPro software as well as other GIS software.
CHS_LSSL_Galway2015 North_Atlantic_HFX_Tromso
Geographic bathymetric grid data at 100 m x 100 m pixel resolution.Datum: WGS84Collaboration of Canada, the United States of America and the European Union as part of the Atlantic Ocean Research Alliance's second project under the Galway Statement. Project mapped the North Atlantic seafloor along a transect from Halifax, Canada to Tromsø, Norway to further the understanding of marine habitats, conservation and navigation. Chief Scientist / Primary Investigator name: Paola Travaglini Platform: CCGS Louis S. St- Laurent (Canadian heavy icebreaker)Device 1 type: Multibeam echo-sounder (sonar)Device 1 manufacturer: Kongsberg Device 1 model: EM122, hull installed behind ice protection window Data and Data format:100 m resolution grid of bathymetryBAG format: Bathymetric Attributed Grid ObjectNavigation and positioning: Trimble GNSS receiver + antennas Applanix POS/MV v5 inertial measuring system Horizontal Datum: WGS84 (G1762) Tidal correction:Zero tide applied: tides are not well known for the major part of the data and tides over very deep water are generally negligible. Sound Velocity Profile measurements:In-situ sound velocity profiles were applied.Note on accuracy/S-44 survey standards:Considering the intended output from this survey (IHO Order 1a - Areas shallower than 100 metres where under-keel clearance is less critical but features of concern to surface shipping may exist.) and using an average depth of 2000m as ‘d’ in the IHO Standard Equation - the allowable Total Vertical Uncertainty (TVU) must be < 26m which indeed the data has achieved (by comparison with overlapping datasets from other surveys/agency data).IHO Order 1aHorizontal positioning accuracy: 5.0 m + 5% of depth (95% Confidence level)(~105 m at a mean depth of 2000 m)Vertical positioning accuracy: 2.5 m < 26 m = Sqrt((0.5 m)^2+(0.013 x 2000 m)^2)
Landsat Circa 2010 Top of Atmosphere Reflectance Mosaic of Canada
Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM+) sensors were used to generate the circa 2010 Mosaic of Canada at 30 m spatial resolution. All scenes were processed to Standard Terrain Correction Level 1T by the United States Geological Survey (USGS). Further processing performed by the Canada Centre for Remote Sensing included conversion of sensor measurements to top of atmosphere reflectance, cloud and cloud shadow detection, re-projection, selection of best measurements, mosaic generation ,noise removal and quality control. To provide a clear sky measurement for each location in Canada, data from the years 2009, 2010, and 2011 were used, but 2010 was preferentially selected. Bands 3 (0.63-0.69 µm), 4 (0.76-0.90 µm), 5 (1.55-1.75 µm), and 7 (2.08-2.35 µm) are provided in this version as significant atmosphere effects strongly limit the quality of the blue (0.45-0.52 µm) and green (0.52-0.60 µm) bands. Multi-criteria compositing was used for the selection of the most representative pixel. For ETM+ onboard Landsat 7 a scan line malfunction caused missing lines of data in all scenes collected after May 2003. Atmosphere and target variability between scenes cause these lines to have significant radiometric differences in some cases. A Fourier transformation approach was applied to correct this occurrence. This mosaic was developed for land cover and biophysical mapping applications across Canada. Other applications of these data are also possible, but should consider the temporal and spectral limitations of the product. Research to enhance the spatial, spectral and temporal aspects are in development for future versions of moderate resolution products from historical Landsat sensors, Landsat 8, and Sentinel 2 data.
High Resolution Digital Elevation Model Mosaic (HRDEM Mosaic) - CanElevation Series
The High Resolution Digital Elevation Model Mosaic provides a unique and continuous representation of the high resolution elevation data available across the country. The High Resolution Digital Elevation Model (HRDEM) product used is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The mosaic is available for both the Digital Terrain Model (DTM) and the Digital Surface Model (DSM) from web mapping services. It is part of the CanElevation Series created to support the National Elevation Data Strategy implemented by NRCan. This strategy aims to increase Canada's coverage of high-resolution elevation data and increase the accessibility of the products.Unlike the HRDEM product in the same series, which is distributed by acquisition project without integration between projects, the mosaic is created to provide a single, continuous representation of strategy data. The most recent datasets for a given territory are used to generate the mosaic. This mosaic is disseminated through the Data Cube Platform, implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The mosaic is available from Web Map Services (WMS), Web Coverage Services (WCS) and SpatioTemporal Asset Catalog (STAC) collections. Accessible data includes the Digital Terrain Model (DTM), the Digital Surface Model (DSM) and derived products such as shaded relief and slope.The mosaic is referenced to the Canadian Height Reference System 2013 (CGVD2013) which is the reference standard for orthometric heights across Canada.Source data for HRDEM datasets used to create the mosaic is acquired through multiple projects with different partners.Collaboration is a key factor to the success of the National Elevation Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.
Ontario Mass Points and Breaklines
This dataset is a collection of 3D mass points and breakline features that were interpreted using photogrammetry from aerial photography. The elevation data is organized into tiles grouped into packages for download. This data is for geospatial tech specialists, and is used by government, municipalities, conservation authorities and the private sector for land use planning and environmental analysis.
Projected Burn Probability (2020-2100)
The data shared are spatially explicit projections of wildfire burn probability across Canada’s forested ecozones under multiple future climate scenarios at a 30-m spatial resolution. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Four future climate scenarios were used to examine the spatiotemporal distribution of burn probability in the 21st century based on climate, vegetation, and topographic conditions ( Mulverhill et al. 2024). Projected burn probability is provided for four Shared Socioeconomic Pathways (SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5) and four future time periods, including 2021-2040, 2041-2060, 2061-2080, and 2081-2100, along with a baseline period representing average climate conditions and burn probability between 1991 and 2020. Outputs represent the probability that the conditions (climate, vegetation, topography) of a given pixel resemble those of historically burned areas. All non-climate variables were held static; therefore, projections represent burn probability under future climate scenarios given contemporary (2020) forest conditions. When using this dataset, please cite Mulverhill et al. (2025), as below.Mulverhill, C., Coops, N. C., Wulder, M. A., Hermosilla, T., White, J. C., & Bater, C. W. (2025). Projected Future Changes in Burn Probability in Canada’s Forests and Communities Under Different Climate Change Scenarios. Canadian Journal of Remote Sensing, 51(1). https://doi.org/10.1080/07038992.2025.2560347(Mulverhill et al. 2025).For a detailed description of the source data and methods applied to the baseline period to enable the Mulverhill et al. (2025) projections, see:Mulverhill, C., Coops, N.C., Wulder, M.A., White, J.C., Hermosilla, T., and Bater, C.W. 2024. “Multidecadal mapping of status and trends in annual burn probability over Canada’s forested ecosystems.” ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 209 pp. 279–295. https://doi.org/10.1016/j.isprsjprs.2024.02.006(Mulverhill et al. 2024).
Basic mapping
The map data set includes the basic maps of the City.It is a representation of the territory of the city of Montreal on a large and medium scale (1:1000, 1:5000, etc.). The presentation of land use is composed of elements produced mainly by photogrammetry and complemented by various techniques, at specific dates. It is a geometric and conventional representation of Montreal's territory in 2D+1 (X, Y + altitude ratings or level curves).The main purposes of the basic mapping product are territorial planning and public consultation.The breakdown of the SQRC 1:1000 sheets is available [here] (/city-of-montreal/quadrillage-sqrc).**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
UAV Vegetation Height Model, Cambridge Bay, Nunavut
The 1 cm resolution vegetation digital height model was extracted using a bare earth model and digital surface model (DSM) derived from unmanned aerial vehicle (UAV) imagery acquired from a single day survey on July 28th 2016, in Cambridge Bay, Nunavut. The mapping product covers 525m2 and was produced by Canada Centre for Remote Sensing /Canada Centre for Mapping and Earth Observation. The UAV survey was completed in collaboration with the Canadian High Arctic Research Station (CHARS) for northern vegetation monitoring research.For more information, refer to our current Arctic vegetation research: Fraser et al; "UAV photogrammetry for mapping vegetation in the low-Arctic" Arctic Science, 2016, 2(3): 79-102. http://www.nrcresearchpress.com/doi/abs/10.1139/AS-2016-0008
UAV Digital Surface Model (DSM) in Cambridge Bay, Nunavut -Vegetation Plot
The 1 cm resolution digital surface model (DSM) was created from unmanned aerial vehicle (UAV) imagery acquired from a single day survey, July 28th 2016, in Cambridge Bay, Nunavut. Five control points taken from a Global Differential Positioning System were positioned in the corners and the center of the vegetation survey. The DSM covering 525m2 was produced by Canada Centre for Remote Sensing /Canada Centre for Mapping and Earth Observation. The UAV survey was completed in collaboration with the Canadian High Arctic Research Station (CHARS) for northern vegetation monitoring research. For more information, refer to our current Arctic vegetation research: Fraser et al; "UAV photogrammetry for mapping vegetation in the low-Arctic" Arctic Science, 2016, 2(3): 79-102. http://www.nrcresearchpress.com/doi/abs/10.1139/AS-2016-0008
UAV Orthomosaic of Cambridge Bay, Nunavut - Vegetation Plot
The 0.34 cm resolution orthomosaic was created from unmanned aerial vehicle (UAV) imagery acquired from a single day survey, July 28th 2016, in Cambridge Bay, Nunavut. Five control points taken from a Global Differential Positioning System were positioned in the corners and the center of the vegetation survey. The orthomosaic covering 525m2 was produced by Canada Centre for Remote Sensing /Canada Centre for Mapping and Earth Observation. The UAV survey was completed in collaboration with the Canadian High Arctic Research Station (CHARS) for northern vegetation monitoring research.For more information, refer to our current Arctic vegetation research: Fraser et al; "UAV photogrammetry for mapping vegetation in the low-Arctic" Arctic Science, 2016, 2(3): 79-102. http://www.nrcresearchpress.com/doi/abs/10.1139/AS-2016-0008.
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback