Digital Elevation Model (DEM) for British Columbia produced by GeoBC. This data is the TRIM DEM converted to the Canadian Digital Elevation Data (CDED)format. The data consists of an ordered array of ground or reflective surface elevations, recorded in metres, at regularly spaced intervals. The spacing of the grid points is .75 arc seconds north/south. The data was converted into 1:50,000 grids for distribution. The scale of this modified data is 1:250,000 which was captured from the original source data which was at a scale of 1:20,000. The CDED format specification are available at ftp://ftp.geogratis.gc.ca/pub/nrcan_rncan/elevation/cdem_mnec/doc/CDEM_product_specs.pdf

This collection is a legacy product that is no longer supported. It may not meet current government standards.The Canadian Digital Elevation Model (CDEM) is part of Natural Resources Canada's altimetry system designed to better meet the users' needs for elevation data and products.The CDEM stems from the existing Canadian Digital Elevation Data (CDED). In these data, elevations can be either ground or reflective surface elevations.A CDEM mosaic can be obtained for a pre-defined or user-defined extent. The coverage and resolution of a mosaic varies according to latitude and to the extent of the requested area.Derived products such as slope, shaded relief and colour shaded relief maps can also be generated on demand by using the Geospatial-Data Extraction tool. Data can then be saved in many formats.The pre-packaged GeoTiff datasets are based on the National Topographic System of Canada (NTS) at the 1:250 000 scale; the NTS index file is available in the Resources section in many formats.

Watershed boundary delineated for Canada-BC hydrometric stations. Currently, watersheds were delineated using 1:50,000 scale boundaries in 1996, and many watersheds encompass entire drainages, instead of just the upstream watersheds. Note - Not yet available, but we are in the process of generating BC hydrometric station upstream watersheds using updated base data, using the following method: Within BC, watershed boundaries are based on the 1:20,000-scale Freshwater Atlas fundamental watersheds, and trimmed using the BC TRIM DEM used to approximate the height-of-land at the station locations. Outside of BC, but within Canada, watershed boundaries were approximated using Canada CDED DEM data for delineation (no "stream burning" was used) and some manual editing of boundaries was done to approximately match hydrology data after the fact. Within U.S.A., the USGS Watershed Boundary Dataset was used (at the best scale available for each drainage) to delineate the watershed boundary, with the watershed trimmed using the USGS National Elevation Dataset to approximate the height-of-land when necessary.

Our Imagery Base Maps and Mosaics of a number of Raster Datasets.  This includes the ASTER DEM, CDED and Shaded Relief Datasets.  As well as a number of mosaics, including SPOT, RapidEye, Landsat, and MVI Landcover data.

Coal Agreement feature class contains provincial extent polygon features representing Coal applications, agreements, leases, and licences, with varying term dates and conditions. These applications and subsequent agreements give the holder the right to explore Coal.

The spatial representation for a Natural Resource (NR) District, that is an administrative area established by the Ministry, within NR Regions.

**ATTENTION! The files in this dataset are designed for streaming, not downloading. For the best experience, please follow the instructions available in the resources.**In replacement of the former Canadian Digital Elevation Model (CDEM) that is no longer supported, the Medium Resolution Digital Elevation Model (MRDEM) product is a multi-source product that integrates elevation data from the Copernicus DEM** acquired during the TanDEM-X Mission (AIRBUS, 2022), and the High Resolution Digital Elevation Model data derived from airborne lidar. This product provides a complete, 30 meters resolution, nationwide coverage for Canada. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived products. The spatial coverage extends into the USA, where needed, to provide coverage for cross-border watersheds in support of hydrological studies and applications. The MRDEM-30-DSM is partially based on the GLO-30 version of the Copernicus DEM** (hereafter named GLO-30). Since elevation values from the GLO-30 are referenced to the EGM2008 geoid model, they were transformed to the Canadian Height Reference System of 2013 (CGVD2013), using the CGG2013 geoid model. Where available, the MRDEM-30-DSM integrates surface data from the lidar-derived HRDEM mosaic, resampled from 1 m to 30 m. The process to generate the MRDEM-30-DTM is more complex. Where available, the HRDEM Mosaic derived from lidar was used since it already provides reliable terrain elevation values. The HRDEM Mosaic data used was resampled from 1m to 30m. Elsewhere, the processing workflow combines a forest removal model and a settlement removal model that is applied to the GLO-30 values in order to estimate the terrain elevation values. Both datasets are projected to Canada Atlas Lambert NAD83 (CSRS) (EPSG:3979).The MRDEM is referenced to the CGVD2013 which is the reference standard for orthometric heights across Canada.The product Medium Resolution Digital Elevation Model (MRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan.** This product was in part produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014- 2018 provided under COPERNICUS by the European Union and ESA; all rights reserved.The organisations in charge of the Copernicus program by law or by delegation do not incur any liability for any use of the Copernicus WorldDEM-30.

Coal Agreement feature class contains provincial extent polygon features representing Coal applications, agreements, leases, and licences, with varying term dates and conditions. These applications and subsequent agreements give the holder the right to explore Coal.

Sectors and days for collecting waste, recyclable materials and compostable materials.attributs:ID - Unique identifierDAY1 - Sector collection day (see also DAY2 and DAY3) DAY2 - Sector collection day (see also DAY1 and DAY3) DAY3 - Sector collection day (see also DAY1 and DAY3) DAY3 - Sector collection day (see also DAY1 and DAY2) CALENDAR - Hyperlink to the sector collection calendar (see also DAY1 and DAY3)**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This tabular data contains environmental discharges (spills) in Saskatchewan with limited information outlining best known location, confirmed substance and quantity. This data is limited to events that occurred before January 1, 2015. Information is not always complete, please contact the Ministry of Environment for further details.The Ministry of Environment's Environmental Protection Branch (EPB) is responsible for responding to incidents where a substance has been discharged into the environment. Under The Environmental Management and Protection Act 2010 (EMPA, 2010), “discharge” means a discharge, drainage, deposit, release or emission into the environment. These records include locations and details of discharge incidents in the Province of Saskatchewan and are currently limited to incidents that were reported to the ministry prior to January 2015.  The Discharge Date is when the Ministry created the record. This is not necessarily the date of the discharge event. We will continue to improve the quality of the information in the table.  As it is validated it will move to the map format, consequently you may notice changes from the table to map format.  Information related to discharges after Janurary 2015 to present are currently found at: https://geohub.saskatchewan.ca/datasets/saskatchewan::discharge-cases-spills/about For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free): 800-567-4224, email: centre.inquiry@gov.sk.ca or visit: Hazardous Spills Reporting.